As we all know, meltblown non-woven fabric equipment is a kind of textile machinery equipment with stable performance and complete functions. It should be noted that improper operation of meltblown non-woven equipment may cause equipment damage.
Therefore, when we operate the melt-blown non-woven equipment, the operator must follow the relevant specifications and regulations to operate and use. The followings are the precautions for the melt-blown non-woven equipment before operation.
1. Before the machine officially starts running, please check whether the oil level of the upper and lower gears of the meltblown non-woven equipment, the water level of the water-cooled box, and the water level of the laser printer meet the requirements.
The water-cooled box and laser coding machine must be filled with pure water. We need to check whether the gear and bearing cover are complete, whether there is dry material attached to the feeding belt and the feeding port, and whether the air pressure meets the requirements immediately.
2. Before starting operation, please check whether the wiring of each part of the machine is correct; whether the cooling system of the barrel and screw is normal and unblocked; whether the drive system is normal, whether the lubricating oil level is normal, whether the oil circuit is unobstructed; whether the system is normal; whether the connecting bolts of the machine head are tightened, etc.
3. Before starting the operation, heat the part that needs to be heated in the meltblown non-woven fabric equipment, and at the same time send the cooling medium to the bottom of the hopper and the cooling part of the screw for cooling. When the set temperature is reached, the temperature should be maintained for 10 minutes to make the temperature of the screw and barrel uniform.
4. Before starting to operate the meltblown non-woven fabric equipment, raise the temperature for about 40 to 50 minutes. Raise the temperature until you pull the motor V-belt by hand until it is comfortable, and then pull it continuously in the normal working direction eight to ten times. It takes about ten minutes to heat up during this process.
Finally, turn on the machine, but still need to continue heating, because normal production needs to continue to increase the heat, and adjust different temperatures according to the different properties of the raw materials.
If we can pay attention to the above matters before operating the meltblown non-woven fabric equipment, then we can largely avoid equipment failure during operation. Although the operation of the meltblown non-woven fabric equipment is very simple, we should not take it lightly, because minor operating errors will affect the normal use of the equipment and may also lead to serious consequences. If you want to know more about meltblown non-woven fabric equipment and solutions after reading the above, welcome to get in touch with us.
As a professional manufacturer of non-woven equipment, we have won praise and trust from many customers with our excellent technology and high-quality products. We put the needs of our customers first, the equipment we produce meets strict standards, and we also have a professional quality inspection system to strictly control the weight of each link of production. If you are interested in our meltblown non-woven equipment, please contact us immediately!